BTS555E3146HKSA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | TO-218-5 |
| Surface Mount | NO |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2001 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 1.9mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 360W |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | BTS555 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 400A |
| Operating Supply Voltage | 34V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 360W |
| Output Current | 128A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Output Current per Channel | 165A |
| Drain to Source Voltage (Vdss) | 40V |
| Nominal Input Voltage | 34V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 600 μs |
| Load Current | 165A |
| Output Peak Current Limit-Nom | 520A |
| Rds On (Typ) | 1.9m Ω |
| Turn Off Time | 200 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
BTS555E3146HKSA1 Overview
As a result, it is packaged in the form of a Tube.The TO-218-5 package includes it.The LED driver is mounted as Through Hole.This switch is of type General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.As a default, the output is set to 1.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts.It is a member of the BTS555 family.A total of 5 terminations can be found in it.In order to operate, the 5 pins are used.The LED driver has 1 functions.The maximum output current drops to 400A in order to meet the operation criteria.Using a voltage of 12V allows for high efficiency.As a result, it has a total of 3 pins.In this case, there is 1.9mOhm resistance in the LED driving board.This electrical component is included in the PROFET? series.The output current is set to 128A in this case.It is recommended that the supply voltage be set at 34V in order to achieve maximum efficiency.
BTS555E3146HKSA1 Features
Supplied from 12V
Resistance of 1.9mOhm
BTS555E3146HKSA1 Applications
There are a lot of Infineon Technologies BTS555E3146HKSA1 Power Switches ICs applications.
- Hard Disk Drives
- Hot Swap
- Portable GPS
- Portable GPS Device
- PC Cards
- Wireless Headsets
- Notebook PC
- Low Voltage I/O System Power
- HDD, SSD
- Hot Swaps
