BTS621L1 E3230
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-220-7 |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | SINGLE |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Base Part Number | BTS621L1 |
| Pin Count | 3 |
| JESD-30 Code | R-PSFM-T7 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 3.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 400 µs |
| Output Peak Current Limit-Nom | 14A |
| Rds On (Typ) | 80m Ω |
| Turn Off Time | 400 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| RoHS Status | Non-RoHS Compliant |
BTS621L1 E3230 Overview
It is package in Tube case.There is a TO-220-7 package that includes it.This lighting drivere has a mounting type of Through Hole.It owns the General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.It is possible to use 2 outputs in the lighting driver.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts has been specified.A lighting driver with Auto Restart, Status Flag features is available.There is a BTS621L1 family of things that it belongs to.It contains 7 terminations.The LED driving board has a total of 2 functions.From the lighting driver, there is a maximum output of 3.5AV.It is possible to achieve a high level of efficiency with a supply voltage of 12V.It is equipped with a total of 3 pins.It belongs to the PROFET? series.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.Vsup (maximum supply voltage) is set to 34V.The supply voltage (Vsup) should be kept above 5V for normal operation.
BTS621L1 E3230 Features
Supplied from 12V
BTS621L1 E3230 Applications
There are a lot of Infineon Technologies BTS621L1 E3230 Power Switches ICs applications.
- Hot Swap
- Hot-Swap Systems
- USB Power Distribution
- PDAs
- Hot Swap
- Mobile Communication Devices
- Telecom and Network Systems
- Wearable Devices
- Various applications equipped with buttons
- Notebook PC
