BTS6510B
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Through Hole |
| Package / Case | TO-220-7 (Formed Leads) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | PROFET® |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 170W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | unknown |
| Base Part Number | BTS6510 |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G7 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 55A |
| Supply Voltage-Max (Vsup) | 34V |
| Power Supplies | 5/34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Nominal Supply Current | 800μA |
| Output Configuration | High Side |
| Power Dissipation | 170W |
| Output Current | 13.6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 470 μs |
| Output Peak Current Limit-Nom | 130A |
| Rds On (Typ) | 4.4m Ω |
| Turn Off Time | 200 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 9.9mm |
| Width | 9.2mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
BTS6510B Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The TO-220-7 (Formed Leads) package contains it.The lighting driver is mounted in the Through Hole position.It owns the General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has a total of 1 outputs.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is part of the BTS6510 family of LED drivers.It has a total of 7 terminations.As far as functions are concerned, the lighting driver has 1.To comply with the operation criteria, the maximum output current is reduced to 55A.The supply voltage can be 12V for high efficiency.As a result, it is mounted in the manner of Surface Mount.As a result, it has a total of 3 pins.It belongs to the PROFET? series.As a result, the output current is set to 13.6A.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.This LED driver is configured to have a maximum supply voltage of 34V (Vsup).The supply voltage (Vsup) should be kept above 5V for normal operation.There is a voltage supply of 5/34V volts on this part.
BTS6510B Features
Supplied from 12V
BTS6510B Applications
There are a lot of Infineon Technologies BTS6510B Power Switches ICs applications.
- PC Cards
- HDD and SSD
- Hot Swaps
- Portable GPS Device
- Wireless Modem Data Cards
- Wearable Devices
- USB Ports/Hubs
- Portable Video Game Players
- Mobile Communication Devices
- Smart Phones, Feature Phones
