BTT60302EKAXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN SUPPLY VOLTAGE RANGE 5 TO 48V |
| Max Power Dissipation | 2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 28V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 4A |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Nominal Supply Current | 9mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 28V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 150 μs |
| Output Peak Current Limit-Nom | 4A |
| Rds On (Typ) | 32m Ω |
| Turn Off Time | 150 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.7mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BTT60302EKAXUMA1 Overview
A Tape & Reel (TR) is used to package it.There is a 14-SOIC (0.154, 3.90mm Width) Exposed Pad package that includes it.Surface Mount is the mounting type of the LED driver.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 2.A supply voltage of Not Required is required for it to operate.Voltage output is N-Channel volts at maximum.It has a total of 14 terminations.For operation, 14 pins are used.As far as the lighting driver is concerned, there are 1 functions.This results in the maximum output current dropping to 4A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 28V.As a result, it is mounted in the manner of Surface Mount.There is an electrical component included in the Automotive, AEC-Q100 series.In this LED driver, the maximum supply voltage is configured to be 36V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 8V.In addition, ALSO OPERATES IN SUPPLY VOLTAGE RANGE 5 TO 48V can be produced using this LED driving board.
BTT60302EKAXUMA1 Features
Supplied from 28V
Additional features like ALSO OPERATES IN SUPPLY VOLTAGE RANGE 5 TO 48V
BTT60302EKAXUMA1 Applications
There are a lot of Infineon Technologies BTT60302EKAXUMA1 Power Switches ICs applications.
- Wireless/Networking Cards
- Solid State Drivers
- USB Power Distribution
- Notebook PC
- Portable GPS Device
- USB Ports/Hubs
- HDD and SSD
- Portable GPS
- Hot Swaps
- Set-Top Boxes
