BU4094BC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 4000B |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Tin/Copper (Sn/Cu) |
| Additional Feature | COMPLIMENTARY SERIAL OUTPUT ALSO AVAILABLE |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 10 |
| Base Part Number | 4094 |
| Function | Serial to Parallel |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 15V |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Propagation Delay | 270 ns |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 1 |
| Number of Output Lines | 10 |
| fmax-Min | 3 MHz |
| Height Seated (Max) | 4.55mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BU4094BC Overview
The device is embedded in 16-DIP (0.300, 7.62mm) package. 16 is the number of terminations on the chip. Presented in a case of Tube. A voltage of 5V is specified for the part's operating supply. 16 pins are located on the device. It is recommended to mount by Through Hole. Through Hole is the way this component is mounted. It is important to note that the operating temperature range is -40°C~85°C. There is a voltage supply within 3V~18V. In the 4000B series, this electrical component is found. The 4094 family can be used to find similar parts. A range of 15V is noted as the operating supply voltage of this chip. Additionally, this section contains the following: COMPLIMENTARY SERIAL OUTPUT ALSO AVAILABLE. It is recommended that this part's supply voltage (Vsup) must not be less than 3V. In the device, there are 1 input lines. There are 10 output lines to operate.
BU4094BC Features
With 16 pins
Mounted in Through Hole type.
Based on 4094 family
Operate supply voltage at 15V
With 10 output lines
BU4094BC Applications
There are a lot of ROHM Semiconductor BU4094BC Shift Registers applications.
- Data Format Converters
- Generate time delay toward digital circuits
- 8-bit data storage
- Counter
- data transfer
- Data manipulation
- Pattern Recognizers
- Delay Line
- Serial-to-parallel data conversion
- Flash Memory
