Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2009 |
Series |
74CBT |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Type |
Bus Switch |
Resistance |
10Ohm |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74CBT3384 |
Pin Count |
24 |
Operating Supply Voltage |
5V |
Circuit |
5 x 1:1 |
Number of Ports |
2 |
Number of Bits |
10 |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
6.6 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Height Seated (Max) |
1.1mm |
Length |
7.8mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
CBT3384PW,118 Overview
In order to save board space, digital switch is located in the 24-TSSOP (0.173, 4.40mm Width).It is packaged according to the Tape & Reel (TR) method.The mounting method digital switch ic uses is Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.With the 74CBT series, the multiplexers are suitable for a diverse range of applications.Its basic configuration includes terminations in the 24 range.Its logic switch base part number is 74CBT3384 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V voltage.Signal switch has 24 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, the supply type is Single.The board has 24 pins configured.The mounting point is Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides 10 bits.Without any external influences, it consumes 3μA current of multiplexer ic at all times.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.A resistance of 2 is used to operate the signal switching.A resistance of 10Ohm is used to operate it.
CBT3384PW,118 Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
CBT3384PW,118 Applications
There are a lot of Nexperia USA Inc. CBT3384PW,118 Signal Switches / Multiplexers / Decoders applications.
- Enabling block of memory depending on address in memory chips
- Solenoid cooling fan
- Paper plants
- Medical industry
- Memory system of computers
- Logic gates for other digital devices
- D/A converters
- RF-based home automation system
- Seven segment displays
- CNC machines