CD40147BE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | Priority Encoder |
| Subcategory | Arithmetic Circuits |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | CD40147 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Max Output Current | 6.8mA |
| Circuit | 10 x 1:4 |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 424mW |
| Number of Bits | 10 |
| Propagation Delay | 450 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 10 |
| Current - Output High, Low | 6.8mA 6.8mA |
| Supply Type | Single |
| Bandwidth | 8MHz |
| Output Polarity | INVERTED |
| Power Supply Current-Max (ICC) | 0.3mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD40147BE Overview
Due to the lack of space on the board, digital switch is provided in the 16-DIP (0.300, 7.62mm).Tube represents its packaging.The method digital switch ic adopts for mounting is Through Hole.the multiplexers uses an analog IC Priority Encoder.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.Using a 3V~18V supply voltage provides digital controlled switch's superior flexibility for designers.Since they are members of the 4000B series, they can be used in a wide variety of applications.As part of its basic configuration, 16 terminations are designed as a part of it.You can also find related parts by using its logic switch base part number of CD40147.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch consists of 16 component pins.There is a type of supply Single that is employed in this case.Currently, it is configured with a 16 pin configuration.This unit is mounted in the way of Through Hole.In this signal multiplexer, there are 10 bits that are provided.Vsup should be kept at 3V to prevent some unnecessary failures.There are 4 outputs designed to operate the turn signal switch.The digital switch ic is an electronic part classified into Arithmetic Circuits.It has 10 inputs.The turn signal switch's circuit consists of 4 channels that are being used for transmission in the circuit.
CD40147BE Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
CD40147BE Applications
There are a lot of Texas Instruments CD40147BE Signal Switches / Multiplexers / Decoders applications.
- Relay
- To select different devices in microprocessor output
- Data bus control
- Computer memory
- To select different task for memory in microprocessor memory systems
- Data distribution
- RF-based home automation system
- Combinational circuit
- Implementing boolean functions with multiple variables
- High-performance memory-decoding applications
