CD4014BPWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER; ALSO OPERATES AS SISO |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Number of Bits | 8 |
| Propagation Delay | 120 ns |
| Turn On Delay Time | 320 ns |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Number of Output Lines | 3 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD4014BPWRE4 Overview
This device can be found embedded within the package TSSOP. 16 is the total number of terminations on the chip. This item is packed in case Tape and Reel. Its operating supply voltage is rated at 5V. 16 pins are present on the device. It is recommended that the mount should be done by Surface Mount. This chip's operating supply voltage is reported as 15V. The following additional aspects of this section are worth noting: OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER; ALSO OPERATES AS SISO. The device has a total of 9 input lines. There are 8 bits on the IC chip. The total number of pins is 16. A temperature below 125°C is recommended for its use. It should not be less than -55°C when operating this device. This supply voltage is employed under 18V. It is used at a higher voltage than 3V. The number of output lines to be operated is 3. There is a subcategory of it called Shift Registers. 1 circuits are present in this device.
CD4014BPWRE4 Features
With 16 pins
Operate supply voltage at 15V
With 3 output lines
CD4014BPWRE4 Applications
There are a lot of Texas Instruments CD4014BPWRE4 Shift Registers applications.
- Data Processors
- temporary data storage
- Flash Memory
- Dual-rank shift, hold, and bus applications
- Serial-to-parallel data conversion
- Pulse Extenders
- data manipulation
- Delay Line
- store data in digital form
- Parallel to serial converter
