CD4014BPWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER; ALSO OPERATES AS SISO |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Number of Bits | 8 |
| Propagation Delay | 120 ns |
| Turn On Delay Time | 320 ns |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Number of Output Lines | 3 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD4014BPWRG4 Overview
As a result, TSSOP package contains the embedded device. This chip has a total termination count of 16. It is used to pack in Tape and Reel case. This part has an operating supply voltage of 5V. There are 16 pins on the device. Mounting by Surface Mount is recommended. This chip's operating supply voltage is reported as 15V. This section has the following additional features: OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER; ALSO OPERATES AS SISO. A device with 9 input lines is available. IC chip bits total 8. There are a total of 16 pins on it. This product should not be used at temperatures above 125°C. For this device to operate, it cannot be lower than -55°C. This supply voltage is employed under 18V. It is necessary to use a voltage that is higher than 3V to provide this supply. The number of output lines to be operated is 3. It belongs to the Shift Registers subcategory. There are 1 circuits in this device.
CD4014BPWRG4 Features
With 16 pins
Operate supply voltage at 15V
With 3 output lines
CD4014BPWRG4 Applications
There are a lot of Texas Instruments CD4014BPWRG4 Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- LED matrix control
- Remote control holding register
- Sequence generator
- 7-segment display control
- Serial-to-parallel data conversion
- Counter
- store data in digital form
- ROM Chips
- data manipulation
