CD4027BM96E4
| Parameters | |
|---|---|
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4027 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 24MHz |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 45 ns |
| Logic Function | AND |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 90ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.06mA |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3500000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
CD4027BM96E4 Overview
16-SOIC (0.154, 3.90mm Width)is the way it is packaged. D flip flop is embedded in the Tape & Reel (TR) package. It is configured with Differentialas an output. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A 3V~18Vsupply voltage is required for it to operate. -55°C~125°C TAis the operating temperature. It is an electronic flip flop with the type JK Type. The 4000Bseries comprises this type of FPGA. Its output frequency should not exceed 24MHz. As a result, it consumes 4μA quiescent current and is not affected by external forces. There have been 16 terminations. Members of the CD4027family make up this object. The power source is powered by 5V. A 5pFfarad input capacitance is provided by this T flip flop. Electronic part Surface Mountis mounted in the way. A total of 16pins are provided on this board. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. For normal operation, the supply voltage (Vsup) should be kept above 3V. The superior flexibility of this circuit is achieved by using 2 circuits. Due to its reliability, this T flip flop is well suited for TR. In terms of quiescent current, it consumes 20μA .
CD4027BM96E4 Features
Tape & Reel (TR) package
4000B series
16 pins
CD4027BM96E4 Applications
There are a lot of Texas Instruments CD4027BM96E4 Flip Flops applications.
- Counters
- Matched Rise and Fall
- Synchronous counter
- Test & Measurement
- ESD protection
- Divide a clock signal by 2 or 4
- Modulo – n – counter
- ATE
- Control circuits
- Event Detectors
