CD4035BMT
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Additional Feature | J AND K BAR SERIAL INPUT |
| Max Power Dissipation | 100mW |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 16MHz |
| Base Part Number | CD4035 |
| Function | Parallel or Serial to Serial |
| Output Type | Complementary |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Propagation Delay | 150 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 500 ns |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | CONFIGURABLE |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Max Input Current | 100nA |
| Number of Input Lines | 6 |
| fmax-Min | 8 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4035BMT Overview
16-SOIC (0.154, 3.90mm Width) is a package containing the embedded device. Chip terminations add up to 16. The Tape & Reel (TR) case contains it. A voltage of 5V is specified for the part's operating supply. On this part, there are 1 elements. It is equipped with a pin count of 16. The mounting method should be Surface Mount. Mounting of this component is indicated by Surface Mount. There is a range of operating temperatures -55°C~125°C. Votage is provided within 3V~18V. The 4000B series contains this electrical component. Similar parts can be found by searching for the CD4035 family. According to the specification, this chip's operating supply voltage falls within the range of 15V. The following additional aspects of this section are worth noting: J AND K BAR SERIAL INPUT. There should be no voltage less than 3V at the minimum supply voltage (Vsup). 6 input lines are available on the device. A quiescent current of 100μA is used. There is 16MHz frequency set on the device.
CD4035BMT Features
With 16 pins
Mounted in Surface Mount type.
Based on CD4035 family
Operate supply voltage at 15V
Quiescent Current at 100μA
CD4035BMT Applications
There are a lot of Texas Instruments CD4035BMT Shift Registers applications.
- Remote control holding register
- Serial-to-parallel data conversion
- Serial to parallel converter
- Parallel to serial converter
- store data in digital form
- Delay Line
- Output expansion
- Dual-rank shift, hold, and bus applications
- Pulse Extenders
- data transfer
