CD4053BE

SPDT 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4053 16 Pins 100nA 5V 16-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD4053BE
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 810
Description: SPDT 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4053 16 Pins 100nA 5V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Weight	951.693491mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	240Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Number of Functions	3
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	CD4053
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	18V
Polarity	Non-Inverting
Power Supplies	5/15V
Number of Channels	2
Max Supply Voltage	20V
Min Supply Voltage	3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	80nA
Nominal Supply Current	80nA
Propagation Delay	60 ns
Quiescent Current	80nA
Turn On Delay Time	720 ns
Logic Function	Demultiplexer, Multiplexer, Mux
Number of Inputs	6
Max Input Voltage	20V
Voltage - Supply, Single/Dual (±)	3V~20V ±2.5V~9V
Supply Type	Dual, Single
Bandwidth	30MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	9V
Number of Gates	3
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.2pF 9pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-40dB @ 6MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	240Ohm
Normal Position	NC
Signal Current-Max	0.01A
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD4053BE Overview

Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tube. In Through Hole, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 2:1. Extended operating temperature around -55°C~125°C TA. Total terminations are 16. A electrical component with 2 channels is capable of high-quality output. A 5V voltage supply should turn on and run the electronic component. As part of its design, the 16 series is equipped with this electronic component. The analog switch ics are built using SPDT switching circuits. Using the CD4053 search parameter, you can discover variants of the switch. A 240Ohm internal resistance characterizes this multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In a normalsituation, users should not supply the switches with voltage higher than 20V. The digital multiplexer has a low cost Dual, Single supply. 3V should be the lowest voltage fed to the electronic component. An operating current of 80nA would be sufficient for this switch device. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 9V. When using dual power supplies, you should attach at least 2.5V. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. It can operate from 18V operating voltages. The 6 inputs need to be operated in order to work. There are 30MHz bandwidths for data transfer. There is 240Ohm Drain to Source resistance on this electronic part.