CD4053BM96E4

SPDT 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4053 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD4053BM96E4
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 371
Description: SPDT 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4053 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	240Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	CD4053
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	18V
Power Supplies	5/15V
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	20V
Min Supply Voltage	3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	80nA
Nominal Supply Current	100μA
Propagation Delay	20 ns
Turn On Delay Time	720 ns
Input Voltage (Min)	-0.5V
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	20.5V
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	3V~20V ±2.5V~9V
Supply Type	Dual, Single
Bandwidth	30MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	10V
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	1.5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.2pF 9pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-40dB @ 6MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Signal Current-Max	0.01A
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD4053BM96E4 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -55°C~125°C TA. 16 terminations have been made so far. This electronic part offers high-quality output due to its 2 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. SPDT switching circuits are used in these analog switch ics. It consists of 3 circuits. Look for analog switch ic variants by searching with CD4053. Analog switches have 240Ohm internal resistance. The datasheets for the 16 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. A voltage higher than 20V should not normally be supplied to the switches. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage the electronic part should receive is 3V. It would be sufficient to run this analogue multiplexer with 80nA current. Despite this switch device's dual supply capability, its voltage should not exceed 10V. The voltage should be at least 1.5V if you are using dual power supplies. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. It can operate from 18V operating voltages. Operating 6 inputs is required. It is possible to transfer data over a 30MHz-bandwidth.