CD4056BM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Other Interface ICs |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4056 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Configuration | 7 Segment |
| Number of Channels | 4 |
| Interface | BCD |
| Operating Supply Current | 40nA |
| Max Supply Current | 300μA |
| Number of Bits | 7 |
| Propagation Delay | 1.3 μs |
| Quiescent Current | 100μA |
| Min Input Voltage | 3V |
| Logic Function | Decoder, Demultiplexer |
| Max Input Voltage | 18V |
| Bandwidth | 8MHz |
| Input Characteristics | STANDARD |
| Display Type | LCD |
| Max Frequency | 8MHz |
| High Level Output Current | -1.9mA |
| Low Level Output Current | 3.6mA |
| Multiplexed Display Capability | NO |
| Digits or Characters | 1 Digit |
| Number of Backplanes | 0-BP |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4056BM Overview
Tube has been designed similarly to this package.Display drivers is embedded in the 16-SOIC (0.154, 3.90mm Width) package.This electrical device has a display type of LCD, which is the display type of the device.Mounting this electronic component on the board is done using Surface Mount.Display drivers is operating at -55°C~125°C degrees FahrenheDisplay drivers.I believe that it will work with a 3V~18VV power source.The 16 termination is used to terminate transmission lines with impedance-matched devices.One of the members of the CD4056 family of devices is this device.The entire device is made up of 16 pins.With 16 pins, it is designed.Display drivers is powered from a supply voltage of 5V.A supply current must be supplied to 40nA for it to function fully.Other Interface ICs can also include it as part of the equation.When the maximum current required for its operation reaches 300μA, the device is considered to be operational.0-BP backplanes are electronic circuit boards.8MHz is the frequency at which it operates.An electronic part of this design was made using 7 Bits.Channel growth is either strong or weak in terms of the number of channels: 4.Drivers consists essentially of 1 elements.The external influences do not matter as long as 100μA of quiescent current is consumed.
CD4056BM Features
16-SOIC (0.154, 3.90mm Width) package
CD4056 family
16 pin count
16 pins
1 elements
CD4056BM Applications
There are a lot of Texas Instruments CD4056BM display drivers applications.
- Gaming Machines Security
- Driving low-voltag fluorescent displays
- Battery Operated Applications
- Digital Clock, Thermometer, Counter, Voltmeter
- Calculators and meters
- Numerlc and Non-Numerlc Panel Dlsplays
- Driving common-cathode LED displays
- Remote Displays
- LED Matrix Displays
- Set-Top Boxes
