CD4518BPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4518 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 18V |
| Power Supplies | 5/15V |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Propagation Delay | 650 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 650 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | BCD Counter |
| Max I(ol) | 0.0015 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 0.03mA |
| Timing | Synchronous |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4518BPWR Overview
A 16-TSSOP (0.173, 4.40mm Width)package is used for this device. For its configuration, 16terminations are used. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. The 2elements are connected by wires. There are a total of 16 pins in all components. As a result, it is packaged as Tape & Reel (TR). In the circuit, there are 16pins that connect other parts. It is mounted using the way of [0]. As a member of 4000B series, it is well suited for various applications. A logic type of BCD Counter is adopted. In this case, the operating temperature should be set to -55°C~125°C. Having a mounting type of [0], it is suitable for installation. Providing a supply voltage of 3V~18Vallows it to operate more reliably. The array stores 4bits in each element. It is possible for the result to be yesin Pbfree code. An important feature of this electronic device is [0]. It should be noted that there are more related parts under the CD4518base part number. Its packaging is provided by [0]. As a result of the voltage source, there is 5/15V voltage. The minimum supply voltage (Vsup) is as low as 3V. A frequency of 8MHzis used for operation. A maximum supply voltage (Vsup) is available up to 18V. In the state of [0], it consumes quiescent current.
CD4518BPWR Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT
Frequency of 8MHz
CD4518BPWR Applications
There are a lot of Texas Instruments CD4518BPWR Counters & Dividers applications.
- MULTIPLICATION
- Timing applications
- LINEARIZATION
- Frequency dividing circuits
- counting/frequency sy nthesizers-BCD output
- Counter control/timers
- Decade counter/decimal decode display (CD4017B）
- ALGEBRAIC COMPUTATION
- Programmable binary and decade
- TRUE RMS-TO-DC CONVERSION
