CD4555BM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | CD4555 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Number of Elements | 2 |
| Circuit | 1 x 2:4 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 190 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 440 ns |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 6.8mA 6.8mA |
| Supply Type | Dual |
| Bandwidth | 8MHz |
| Power Supply Current-Max (ICC) | 0.3mA |
| Number of Input Lines | 1 |
| Voltage Supply Source | Dual Supply |
| Input Conditioning | STANDARD |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4555BM Overview
This is a relatively small item of digital switch that is included in the 16-SOIC (0.154, 3.90mm Width) in order to save space on the board.Tube is the method used for packaging.digital switch ic uses the method of Surface Mount for mounting.The analog IC in the multiplexers is identified as Decoder/Demultiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.Design engineers have more flexibility when digital controlled switch operates at 3V~18V voltage.The multiplexers from 4000B series can be used for a wide range of applications.Among its basic configurations are 16 terminations.The base part number is CD4555, which is also useful when looking up signal switch's related components.For multiplexer's system, 5V voltage is supplied.Signal switch has 16 component pins.GULL WING represents the end of conductors.In this case, Dual is employed as the supply type.With 16 pins, it is configured.Multiplexer ics are mounted in the direction of Surface Mount.Signal multiplexer consists of 4 bits.Keep Vsup at 3V to avoid unnecessary failures.As a result, the turn signal switch consists of 4 outputs.Decoder/Drivers is a category for the digital switch ics.It consumes 100μA current of multiplexer ic without external influences.The multiplexers have1 input lines on the board that accept voltage levels.This mux switch configuration has 2 elements.
CD4555BM Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual
1 input lines
CD4555BM Applications
There are a lot of Texas Instruments CD4555BM Signal Switches / Multiplexers / Decoders applications.
- Code converters
- Audio transmission
- Microprocessor instruction decoding
- Automatic health monitoring systems
- Arithmetic Logic Units
- To select different devices in microprocessor input
- Automation system
- Textile mills
- Data bus control
- Data transfer
