CD74AC299M96E4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.000539mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.5V |
| Number of Bits | 8 |
| Propagation Delay | 12.9 ns |
| Turn On Delay Time | 186 ns |
| Family | AC |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 10 |
| fmax-Min | 95 MHz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74AC299M96E4 Overview
There is a SOIC package embedded with the device. A total of 20 terminations can be found on the chip. This item is packed in case Tape and Reel. A voltage of 3.3V is specified for the part's operating supply. The device is equipped with 20 pins. The mounting method should be Surface Mount. Electronic components fall under the category of AC. A range of 5V is noted as the operating supply voltage of this chip. There are also the following additional considerations in this section: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. There are 10 input lines available in the device. IC chip bits total 8. The pin count is 20. Using it below 125°C is recommended. Operation of this device requires a value greater than -55°C. 5.5V is the supply voltage used. This supply voltage is employed higher than 1.5V. In this device, there are 1 circuits that are active at the same time.
CD74AC299M96E4 Features
With 20 pins
Operate supply voltage at 5V
CD74AC299M96E4 Applications
There are a lot of Texas Instruments CD74AC299M96E4 Shift Registers applications.
- 8-bit data storage
- Parallel to serial converter
- Data Format Converters
- Remote control holding register
- data transfer
- Sequence generator
- Serial to parallel converter
- Remote control holding register
- Counter
- Pseudo Random Pattern Generator
