CD74AC74M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 110MHz |
| Propagation Delay | 125 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 2.5 ns |
| Family | AC |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 90000000Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74AC74M Overview
In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. There is an embedded version in the package Tube. Currently, the output is configured to use Differential. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. With a supply voltage of 1.5V~5.5V volts, it operates. Temperature is set to -55°C~125°C TA. It belongs to the type D-Typeof flip flops. In terms of FPGAs, it belongs to the 74AC series. There should be no greater frequency than 110MHzon its output. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. You can search similar parts based on 74AC74. It is powered by a voltage of 3.3V . The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of AC. A part of the electronic system is mounted in the way of Surface Mount. A total of 14pins are provided on this board. This device has the clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. It reaches the maximum supply voltage (Vsup) at 5.5V. The superior flexibility is achieved through the use of 2 circuits. There are 3.3/5V power supplies attached to it. The output current of 24mA makes it feature maximum design flexibility. In order for the chip to function, it has 1output lines. In terms of quiescent current, it consumes 4μA .
CD74AC74M Features
Tube package
74AC series
14 pins
3.3/5V power supplies
CD74AC74M Applications
There are a lot of Texas Instruments CD74AC74M Flip Flops applications.
- Individual Asynchronous Resets
- High Performance Logic for test systems
- Parallel data storage
- Matched Rise and Fall
- Circuit Design
- EMI reduction circuitry
- Storage Registers
- Divide a clock signal by 2 or 4
- Bounce elimination switch
- Latch-up performance
