CD74ACT273M
| Parameters | |
|---|---|
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 85MHz |
| Propagation Delay | 13.5 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 3.4 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 13.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
CD74ACT273M Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. It is contained within the Tubepackage. Non-Invertedis the output configured for it. The trigger configured with it uses Positive Edge. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is -55°C~125°C TA. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74ACTseries of FPGAs. It should not exceed 85MHzin terms of its output frequency. The element count is 1 . A total of 20terminations have been recorded. If you search by 74ACT273, you will find similar parts. The power source is powered by 5V. Its input capacitance is 10pFfarads. In terms of electronic devices, this device belongs to the ACTfamily of devices. There is an electronic component mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. There is a clock edge trigger type of Positive Edgeon this device. It is included in FF/Latches. Flip flops designed with 8bits are used in this part. 8 circuits are used to achieve its superior flexibility. It runs on 5Vvolts of power. For high efficiency, the supply voltage should be set to 5V. It offers maximum design flexibility with its output current of 24mA. It operates with 4 output lines. As a result, it consumes 8μA of quiescent current without being affected by external factors.
CD74ACT273M Features
Tube package
74ACT series
20 pins
8 Bits
5V power supplies
CD74ACT273M Applications
There are a lot of Texas Instruments CD74ACT273M Flip Flops applications.
- Digital electronics systems
- Frequency Divider circuits
- Communications
- Guaranteed simultaneous switching noise level
- Data transfer
- ESCC
- Common Clocks
- Convert a momentary switch to a toggle switch
- Frequency division
- Pattern generators
