CD74HC173E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC173 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Output Current | 7.8mA |
| Number of Bits | 4 |
| Clock Frequency | 60MHz |
| Propagation Delay | 300 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 17 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.0078 A |
| Max Propagation Delay @ V, Max CL | 34ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 60 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC173E Overview
In the form of 16-DIP (0.300, 7.62mm), it has been packaged. Package Tubeembeds it. As configured, the output uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. A supply voltage of 2V~6V is required for operation. -55°C~125°C TAis the operating temperature. D-Typedescribes this flip flop. It belongs to the 74HCseries of FPGAs. In order for it to function properly, its output frequency should not exceed 60MHz. D latch consists of 1 elements. There have been 16 terminations. The object belongs to the 74HC173 family. The D flip flop is powered by a voltage of 4.5V . There is 10pF input capacitance for this T flip flop. HC/UHis the family of this D flip flop. This electronic part is mounted in the way of Through Hole. With its 16pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. An electronic part with 4bits has been designed. The maximal supply voltage (Vsup) reaches 6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Its output current of 7.8mAallows for maximum design flexibility. In order for the chip to function, it has 3output lines. This input has 2lines. Despite external influences, it consumes 8μAof quiescent current. Additionally, there are WITH DUAL OUTPUT ENABLE on the electronic flip flop that can be referred to. There are 4 channels available.
CD74HC173E Features
Tube package
74HC series
16 pins
4 Bits
CD74HC173E Applications
There are a lot of Texas Instruments CD74HC173E Flip Flops applications.
- Latch-up performance
- Dynamic threshold performance
- Automotive
- High Performance Logic for test systems
- Functionally equivalent to the MC10/100EL29
- Memory
- Patented noise
- ESD protection
- Registers
- Balanced Propagation Delays
