CD74HC173M96
| Parameters | |
|---|---|
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC173 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Output Current | 7.8mA |
| Number of Bits | 4 |
| Clock Frequency | 60MHz |
| Propagation Delay | 300 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 17 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.0078 A |
| Max Propagation Delay @ V, Max CL | 34ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 60 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
CD74HC173M96 Overview
As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tape & Reel (TR) package. The output it is configured with uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. Temperature is set to -55°C~125°C TA. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 74HC series. Its output frequency should not exceed 60MHz. In total, it contains 1 elements. 16terminations have occurred. Members of the 74HC173family make up this object. It is powered by a voltage of 4.5V . Input capacitance of this device is 10pF farads. This D flip flop belongs to the family of HC/UH. There is an electronic component mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is included in FF/Latches. It is designed with 4bits. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be above 2V. Its flexibility is enhanced by 4 circuits. Considering the reliability of this T flip flop, it is well suited for TR. With a current output of 7.8mA , it offers maximum design flexibility. It has 3 output lines to operate. 2input lines are available for you to choose from. There is a consumption of 8μAof quiescent current from it. Additionally, it is characterized by WITH DUAL OUTPUT ENABLE.
CD74HC173M96 Features
Tape & Reel (TR) package
74HC series
16 pins
4 Bits
CD74HC173M96 Applications
There are a lot of Texas Instruments CD74HC173M96 Flip Flops applications.
- Circuit Design
- Digital electronics systems
- Instrumentation
- Memory
- Event Detectors
- Guaranteed simultaneous switching noise level
- Data Synchronizers
- Differential Individual
- Test & Measurement
- Buffer registers
