CD74HC175E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC175 |
| Function | Master Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 4 |
| Clock Frequency | 35MHz |
| Propagation Delay | 175 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.0052 A |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 53 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 23 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC175E Overview
The flip flop is packaged in a case of 16-DIP (0.300, 7.62mm). As part of the package Tube, it is embedded. T flip flop is configured with an output of Differential. It is configured with a trigger that uses Positive Edge. Through Holemounts this electrical part. The JK flip flop operates with an input voltage of 2V~6V volts. The operating temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74HC series. This D flip flop should not have a frequency greater than 35MHz. In total, it contains 1 elements. Terminations are 16. The 74HC175 family contains it. A voltage of 4.5V is used to power it. Its input capacitance is 10pFfarads. Devices in the HC/UHfamily are electronic devices. A part of the electronic system is mounted in the way of Through Hole. It is designed with 16 pins. This device has Positive Edgeas its clock edge trigger type. It is included in FF/Latches. An electronic part designed with 4bits is used in this application. It reaches the maximum supply voltage (Vsup) at 6V. Normally, the supply voltage (Vsup) should be above 2V. In order for the device to operate, it requires 2/6V power supplies. The output current of 5.2mA makes it feature maximum design flexibility. 8μAquiescent current consumed. A total of 4 channels are available.
CD74HC175E Features
Tube package
74HC series
16 pins
4 Bits
2/6V power supplies
CD74HC175E Applications
There are a lot of Texas Instruments CD74HC175E Flip Flops applications.
- Computers
- Patented noise
- Storage registers
- Shift Registers
- Single Up Count-Control Line
- Frequency division
- Buffer registers
- Asynchronous counter
- Balanced Propagation Delays
- Functionally equivalent to the MC10/100EL29
