CD74HC221PWR
| Parameters | |
|---|---|
| Logic Type | Monostable |
| Output Polarity | COMPLEMENTARY |
| Power Supply Current-Max (ICC) | 0.08mA |
| Schmitt Trigger Input | Yes |
| Number of Data/Clock Inputs | 2 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Packing Method | TR |
| Max Power Dissipation | 166mW |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC221 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 2 |
| Propagation Delay | 18ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 315 ns |
| Family | HC/UH |
| Logic Function | Multivibrator |
| Current - Output High, Low | 5.2mA 5.2mA |
CD74HC221PWR Overview
In this case, the product is packaged in a 16-TSSOP (0.173, 4.40mm Width) case.In case of Cut Tape (CT), the equipment should be packed.You should mount it with a Surface Mount type.A part's logic type includes Monostable as part of its logic.Votage is supplied within a period of time called 2V~6V.Multivibrator is one of the electrical components that is included in the 74HC series.Unless otherwise specified, this part must operate at no lower than -55°C~125°C degrees Celsius.5.2mA 5.2mA's current output is low and its voltage output is high.As far as the design is concerned, the component is based on the 74HC221 family of components.Overall, it has 16 terminations.There is no problem with the device handling the 4.5V voltage.Data and clock inputs are provided through 2 inputs.The part has a total of 16 pins.HC/UH family is the family that it belongs to.In this part, you can find 16 pins.As shown in the picture, Surface Mount is mounting the device.Minimum supply voltage must be greater than 2V in order for the supply voltage to exceed 2V.In the state of quiescence, it consumes a lot of current at 8μA.Integrated circuit is specified that the operating supply voltage for the chip is 5V volts.In order for this chip to perform correctly, it needs a voltage supply of 6V volts.There is a limit to the amount of output current that can be supplied to the device by 5.2mA.IC chips have 2 bits total.There is a recommendation to run the power supply current under 0.08mA.Integrated circuit is packaged by TR.On the device, there are 2 circuits available for use.
CD74HC221PWR Features
in 16-TSSOP (0.173, 4.40mm Width) package
Mounting Type: Surface Mount
Logic Type: Monostable
Operating Temperature: 74HC
based on 74HC221
Supply Voltage: 4.5V
Quiescent Current at 8μA
output current at 5.2mA
2 bits
CD74HC221PWR Applications
There are a lot of Texas Instruments CD74HC221PWR applications of multivibrators.
- Mobile Internet Devices
- Embedded PCs
- AV Receivers
- Frequency division
- Digital Radio and Internet Radio Players
- GPS: Personal Navigation Devices
- Personal Digital Assistant (PDA)
- Astable multivibrator
- Solid-State Drive (SSD): Client and Enterprise
- Video Analytics Servers
