CD74HC377PWRE4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Propagation Delay | 175 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| fmax-Min | 23 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC377PWRE4 Overview
In the form of TSSOP, it has been packaged. A package named Tape & Reel (TR)includes it. A total of 1 elements are present. It has been determined that there have been 20 terminations. An input voltage of 5Vpowers the D latch. HC/UHis the family of this D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. There are 20pins on it. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. There is a consumption of 8μAof quiescent current from it. Additionally, there are WITH HOLD MODE on the electronic flip flop that can be referred to. There is -5.2mA output current at the high level. The low level output current is set to 5.2mA. Ideally, the operating temperature should be below 125°C. The operating temperature should be higher than -55°C. It is powered by 2V as its minimum supply voltage. The maximum supply voltage supported by the flip flop is 6V. The frequency can be set to 60MHz. The logic IC it adopts is D FLIP-FLOP. There are 1 functions associated with the JK flip flop. There are 20 pins on the D latch. This flip flop features a maximum design flexibility due to its output current of 5.2mA.
CD74HC377PWRE4 Features
Tape & Reel (TR) package
20 pins
1 Functions
20 pin count
CD74HC377PWRE4 Applications
There are a lot of Texas Instruments CD74HC377PWRE4 Flip Flops applications.
- Differential Individual
- Dynamic threshold performance
- Set-reset capability
- Supports Live Insertion
- Data storage
- Parallel data storage
- Data Synchronizers
- Frequency division
- High Performance Logic for test systems
- Computers
