CD74HC74E
| Parameters | |
|---|---|
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 50MHz |
| Propagation Delay | 175 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 53 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
CD74HC74E Overview
The flip flop is packaged in a case of 14-DIP (0.300, 7.62mm). The package Tubecontains it. T flip flop is configured with an output of Differential. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. The JK flip flop operates at a voltage of 2V~6V. Currently, the operating temperature is -55°C~125°C TA. This D latch has the type D-Type. It is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 50MHz. There have been 14 terminations. The 74HC74 family contains it. The power supply voltage is 4.5V. This T flip flop has a capacitance of 10pF farads at the input. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. It is mounted by the way of Through Hole. Basically, it is designed with a set of 14 pins. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. As soon as Vsup reaches 6V, the maximum supply voltage is reached. The supply voltage (Vsup) should be kept above 2V for normal operation. With an output current of 5.2mA, this device offers maximum design flexibility. To operate, the chip has a total of 1 output lines. As a result, it consumes 4μA of quiescent current without being affected by external factors. There are 2 channels available.
CD74HC74E Features
Tube package
74HC series
14 pins
CD74HC74E Applications
There are a lot of Texas Instruments CD74HC74E Flip Flops applications.
- Patented noise
- Modulo – n – counter
- High Performance Logic for test systems
- Storage registers
- Differential Individual
- ESD performance
- Communications
- ESCC
- Balanced 24 mA output drivers
- Power down protection
