banner_page

CD74HCT40103MG4

1 Element 5V CMOS DUAL Counters & Dividers 74HCT Series 74HCT40103 16 Pins Down Positive Edge 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CD74HCT40103MG4
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 434
  • Description: 1 Element 5V CMOS DUAL Counters & Dividers 74HCT Series 74HCT40103 16 Pins Down Positive Edge 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 141.690917mg
Operating Temperature -55°C~125°C
Packaging Tube
Series 74HCT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Additional Feature TCO OUTPUT; RESET TO MAX COUNT
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Frequency 25MHz
Base Part Number 74HCT40103
Pin Count 16
Operating Supply Voltage 5V
Number of Elements 1
Power Supplies 5V
Load Capacitance 50pF
Propagation Delay 102 ns
Quiescent Current 8μA
Turn On Delay Time 102 ns
Reset Asynchronous
Family HCT
Logic Function Counter
Direction Down
Logic Type Binary Counter
Max I(ol) 0.004 A
Number of Bits per Element 8
Trigger Type Positive Edge
fmax-Min 9 MHz
Clock Edge Trigger Type Positive Edge
Count Rate 14MHz
Timing Synchronous
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CD74HCT40103MG4 Overview


A 16-SOIC (0.154, 3.90mm Width)package is used for this device. There are 16 terminations used for its configuration. Having a supply voltage of 5V enables to operate in a fully flexible manner. There are wires connecting 1elements. All component pins are equal to 16. As a result, it is packaged in the way of a Tube. Circuit components are connected with 16pins. The device is mounted in the direction of [0]. It is included in the HCTfamily. With its 74HCTseries designation, it can be used for a range of applications. Binary Counteris adopted as the logic type. It is recommended that the operating temperature be set to -55°C~125°C. Having a mounting type of [0], it is suitable for installation. In the case of a supply voltage of [0], it operates more reliably. An array consists of 8bits for each element. Pbfree code may result in yes. It is important to note that in regards to this electronic device, TCO OUTPUT; RESET TO MAX COUNTis an extremely significant feature. Among its base part number [0], you will find additional parts that are related. From the voltage source, there is a voltage of 5V volts. It takes supply voltage of 5V to operate. A frequency of 25MHzis used for operation. There is a quiescent current consumption at 8μA.

CD74HCT40103MG4 Features


Embedded in the 16-SOIC (0.154, 3.90mm Width) package
8 bits per element
TCO OUTPUT; RESET TO MAX COUNT
Operating supply voltage of 5V
Frequency of 25MHz

CD74HCT40103MG4 Applications


There are a lot of Texas Instruments CD74HCT40103MG4 Counters & Dividers applications.

  • Control counters
  • Dual Up Counters
  • Frequency division
  • Counter control/timers
  • Divide-by-N counting
  • MULTIPLICATION
  • Timers
  • Binary counter/decoder
  • Divide-by"N" counters/frequency synthesizers
  • Frequency dividing circuits

Write a review

Note: HTML is not translated!
    Bad           Good