CD74HCT4024MG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 25MHz |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 7 |
| Propagation Delay | 60 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 60 ns |
| Reset | Asynchronous |
| Family | HCT |
| Logic Function | Counter |
| Direction | Unidirectional |
| Max I(ol) | 0.004 A |
| Clock Edge Trigger Type | Negative Edge |
| Height | 1.58mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HCT4024MG4 Overview
It is a device supplied in the SOIC package. It is configured using 14terminations. This device is fully flexible due to the supply voltage of [0]. The device has 1terminations. In total, there are 14pins on the component. Circuit components are connected by 14pins. The way of Surface Mount is used to mount it. The HCTfamily is derived from it. There is information in the device in the form of 7bits. The temperature grade of this device is MILITARY. In order to package it, TUBEis employed. From the voltage source, there is 5Vvoltage. For the device to operate, a voltage supply of 5Vis required. The electrical properties of the device remain stable at a maximum temperature of [0]. Temperature ranges are specified, with -55°Cset as a lower limit. The frequency of the device is 25MHz. The maximum voltage that can be applied to the device is 5.5V. It is possible to supply the device with a voltage as low as 4.5V. In the state of [0], it consumes quiescent current.
CD74HCT4024MG4 Features
Embedded in the SOIC package
Operating supply voltage of 5V
Frequency of 25MHz
CD74HCT4024MG4 Applications
There are a lot of Texas Instruments CD74HCT4024MG4 Counters & Dividers applications.
- Fixed and programmable counters greater than 10
- Binary counter/decoder
- Divide-by"N" counters/frequency synthesizers
- Dual Up Counters
- ANALOG SIGNAL PROCESSING
- Fixed or Programmable Frequency Division
- Control counters
- Frequency dividers
- SQUARING
- Divide-by-N counting
