CDCE62005RGZT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Weight | 138.005479mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Clock Generator |
| Packing Method | TR |
| Max Power Dissipation | 1.7W |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 1.175GHz |
| Base Part Number | CDCE62005 |
| Output | LVCMOS, LVDS, LVPECL |
| Pin Count | 48 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI, Serial |
| Number of Circuits | 1 |
| Nominal Supply Current | 20mA |
| Frequency (Max) | 1.5GHz |
| Input | LVCMOS, LVDS, LVPECL, Crystal |
| Ratio - Input:Output | 3:5 |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/Yes |
| Input Current | 20mA |
| Divider/Multiplier | Yes/No |
| Height | 1mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCE62005RGZT Overview
Clock generator is packaged in the way of Tape & Reel (TR). In the 48-VFQFN Exposed Pad package, there is an embedded clock generator. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are 48 terminations found in the file. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. LVCMOS, LVDS, LVPECL, Crystal is designed as this clock generator's input. Using 1 circuits, the electronic part's full performance can be accessed. 1.5GHz is the maximal value for normal operation. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. It would take a maximum supply voltage of 3.6V to operate this time clock generator. This frequency synthesizer requires a supply voltage above 3V to be safe. As long as you provide 3V~3.6V supply voltage, it will work. Based on test statistics, ambient temperature should be set at -40°C~85°C. As the name suggests, this is a clock generator that is compatible with LVCMOS, LVDS, LVPECL logic levels. As far as this electronic part is concerned, it can be classified as a Clock Generator component. Clock PLL is equipped with 48 pin count. These related electrical parts are available for the base part number CDCE62005. The clock PLL has 48 pins that are available. In terms of the supply voltage, PLL clock can handle 3.3V volts. The frequency synthesizer features 5 signal outputs to ensure as high a frequency as possible. At a frequency of 1.175GHz, the system can achieve high efficiency. There is no doubt that the TR package is an ideal fit for this clock generator ic.
CDCE62005RGZT Features
Available in the 48-VFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CDCE62005RGZT Applications
There are a lot of Texas Instruments CDCE62005RGZT Clock Generators applications.
- Clock recovery
- Local oscillator source in receiver
- 10 Gigabit Ethernet
- Smartphones
- Radiotelephones
- Frequency Modulation (FM) stereo decoders
- Tracking filters
- Aerospace and defense
- Medical equipment
- Cable television converter boxes
