CDCE72010RGCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Weight | 209.304529mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Clock Synchronizer, Fanout (Distribution), Jitter Cleaner |
| Subcategory | Clock Driver |
| Packing Method | TR |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.5GHz |
| Base Part Number | CDCE72010 |
| Output | LVCMOS, LVDS, LVPECL |
| Pin Count | 64 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Number of Circuits | 1 |
| Nominal Supply Current | 20mA |
| Number of Inputs | 2 |
| Input | LVCMOS, LVDS, LVPECL |
| Ratio - Input:Output | 3:20 |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Propagation Delay (tpd) | 3.4 ns |
| Input Current | 20μA |
| Divider/Multiplier | Yes/No |
| Height | 1mm |
| Length | 9mm |
| Width | 9mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCE72010RGCT Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. In the 64-VFQFN Exposed Pad package, there is an embedded clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. 64 terminations can be found in frequency synthesizer. To operate this time clock generator, 3.3V voltage should be applied. LVCMOS, LVDS, LVPECL is designed for clock generator's input. Using 1 circuits, the electronic part's full performance can be accessed. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Approximately 3.6V is the maximum supply voltage needed by this time clock generator. This frequency synthesizer requires a supply voltage above 3V to be safe. Clock generators should operate with the voltage supply of 3V~3.6V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. I would like to present to you a frequency synthesizer that is compatible with LVCMOS, LVDS, LVPECL logic levels. This electronic component is usually classified as a Clock Synchronizer, Fanout (Distribution), Jitter Cleaner component. In particular, this clock PLL is designed to be used with microprocessors. This part number CDCE72010 is related to the following electrical components. A 64 pin is available on the clock PLL. RF synthesizers can handle a voltage of 3.3V as the supply voltage. As such, it is often referred to as a kind of Clock Driver clock PLL. 10 signal outputs maximi10e the output frequency. At a frequency of 1.5GHz, the system can achieve high efficiency. A clock generator ic such as this would be well suited to the TR package. 2 inputs are employed on this electronic frequency generator.
CDCE72010RGCT Features
Available in the 64-VFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CDCE72010RGCT Applications
There are a lot of Texas Instruments CDCE72010RGCT Clock Generators applications.
- Space communucation
- Telecommunication systems
- Satellite navigation communication
- Satellite receivers
- Myriad digital applications
- Reference signals to RF systems
- FPGA and processor clocks
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Phase modulation cellular systems
- Symbol synchronization
