CDCE913PWR
| Parameters | |
|---|---|
| Ratio - Input:Output | 1:3 |
| Primary Clock/Crystal Frequency-Nom | 32MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/Yes |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Spread Spectrum Clock Driver |
| Subcategory | Clock Generators |
| Voltage - Supply | 1.7V~1.9V 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Frequency | 160MHz |
| Base Part Number | CDCE913 |
| Output | LVCMOS |
| Pin Count | 14 |
| Number of Outputs | 3 |
| Operating Supply Voltage | 1.8V |
| Number of Circuits | 1 |
| Nominal Supply Current | 11mA |
| Frequency (Max) | 230MHz |
| Input | LVCMOS, Crystal |
CDCE913PWR Overview
As a clock IC, it uses the Tape & Reel (TR) package. There is a clock generator embedded in the 14-TSSOP (0.173, 4.40mm Width) package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. In it, there are 14 terminations to be found. Clock generator ics require a voltage of 1.8V. LVCMOS, Crystal is designed as this clock generator's input. 1 circuits are used to achieve clock PLL's superior flexibility. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 230MHz. With the Surface Mount, it is easy to install this electric component on the panel. Clock generator ic works with 1.7V~1.9V 2.3V~3.6V. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. A frequency synthesizer which is compatible with the LVCMOS logic levels is presented here. An electrical part such as this one can be classified as a Spread Spectrum Clock Driver component. In particular, this clock PLL is designed to be used with microprocessors. Related electrical parts can be found for the base part number CDCE913. There is an available 14 pin on the PLL. Time clock generator can handle a voltage of 1.8V as the supply voltage. Clock generator can also be included into Clock Generators. 3 signal outputs are provided for enhancing output frequency as much as possible. By operating at a frequency of 160MHz, frequency generator is able to achieve high efficiency.
CDCE913PWR Features
Available in the 14-TSSOP (0.173, 4.40mm Width)
Supply voltage of 1.8V
Operating supply voltage of 1.8V
CDCE913PWR Applications
There are a lot of Texas Instruments CDCE913PWR Clock Generators applications.
- Clock synchronization
- Modems
- Radio receivers
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Clock recovery
- Local oscillator source in receiver
- Electronic countermeasures
- Automatic test equipment
- 10 Gigabit Ethernet
- Antenna automatic tracking
