banner_page

CDCE949PW

3.3V PLL Clock Generator 230MHz CDCE949 Clock Generators 24 Pins 24-TSSOP (0.173, 4.40mm Width) 24 Terminals Surface Mount 1.7V~1.9V Tube


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CDCE949PW
  • Package: 24-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 470
  • Description: 3.3V PLL Clock Generator 230MHz CDCE949 Clock Generators 24 Pins 24-TSSOP (0.173, 4.40mm Width) 24 Terminals Surface Mount 1.7V~1.9V Tube (Kg)

Details

Tags

Parameters
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Frequency 160MHz
Base Part Number CDCE949
Output LVCMOS
Pin Count 24
Number of Outputs 9
Operating Supply Voltage 1.8V
Number of Elements 4
Interface Serial
Number of Circuits 1
Operating Supply Current 38mA
Nominal Supply Current 38mA
Max Supply Current 38mA
Frequency (Max) 230MHz
Logic Function Clock
Input LVCMOS, Crystal
Ratio - Input:Output 1:9
Primary Clock/Crystal Frequency-Nom 32MHz
PLL Yes with Bypass
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Height 1.2mm
Length 7.8mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-TSSOP (0.173, 4.40mm Width)
Number of Pins 24
Weight 89.499445mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
Type PLL Clock Generator
Voltage - Supply 1.7V~1.9V
Terminal Position DUAL

CDCE949PW Overview


It is packaged using the Tube method since it is a clock IC. The 24-TSSOP (0.173, 4.40mm Width) package includes this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As you can see, it consists of 24 terminations. Clock generator ics require a voltage of 3.3V. LVCMOS, Crystal is designed for clock generator's input. There are 1 circuits implemented in order to achieve full performance from this electronic part. A clock-based RF synthesizer that provides a max frequency of 230MHz is available. PLL clock is mounted in the way of Surface Mount. As far as the supply voltage is concerned, clock PLL can be used with 1.7V~1.9V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. LVCMOS is designed for clock generator's output. PLL Clock Generator is the type of electrical part that this component is classified as. The clock-generating IC is a 24-bit device designed specifically for microprocessors. This part number CDCE949 is related to the following electrical components. Clock generator is designed with 24 pins. Time clock generator can handle a voltage of 1.8V as the supply voltage. Clock PLL has 9 signal outputs to maximi9e output frequency. High efficiency is achieved when operating at a frequency of 160MHz. A supply current of 38mA is required to fully operate clock PLL. In this case, we are looking at a frequency generator with 4 elements that is low-jitter. This frequency synthesizer operates at a maximum current of 38mA. PLL is able to deliver the logic function of Clock.

CDCE949PW Features


Available in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 1.8V

CDCE949PW Applications


There are a lot of Texas Instruments CDCE949PW Clock Generators applications.

  • Clock signals to the high-speed Digital RF circuits
  • Radiotelephones
  • Small signal recovery
  • Test equipment
  • Peripheral devices
  • Mobile telephones
  • Set-top boxes
  • Mixed mode (analog and digital) applications
  • Frequency synthesis
  • Multi-function printers

Write a review

Note: HTML is not translated!
    Bad           Good