CDCV850DGG
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 2 weeks ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| Termination | SMD/SMT |
| Type | PLL Clock Driver |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.3V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 140MHz |
| Base Part Number | CDCV850 |
| Output | SSTL-2 |
| Pin Count | 48 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 2.5V |
| Supply Voltage-Max (Vsup) | 2.7V |
| Power Supplies | 2.52.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | Serial |
| Number of Circuits | 1 |
| Nominal Supply Current | 4mA |
| Max Supply Current | 6mA |
| Family | 850 |
| Input | LVTTL, SSTL-2 |
| Ratio - Input:Output | 1:11 |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/Yes |
| Propagation Delay (tpd) | 4 ns |
| Input Current | 10μA |
| Divider/Multiplier | No/No |
| Same Edge Skew-Max (tskwd) | 0.075 ns |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCV850DGG Overview
In order to package it as a clock IC, the Tube package is used. Embedded in the 48-TFSOP (0.240, 6.10mm Width) package is this Clock PLL. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. 48 terminations can be found in frequency generators. This electronic frequency generator requires a voltage of 2.5V. It is designed that the Clock PLL's input should be LVTTL, SSTL-2. Using 1 circuits, the electronic part's full performance can be accessed. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock PLL is capable of receiving a maximum of 2.7V as a supply voltage. It is safe to use this frequency synthesizer with a supply voltage above 2.3V. Clock generator ic works with 2.3V~2.7V. Statistics suggest that the ambient temperature be set at 0°C~85°C, which is what is estimated by the test. A frequency synthesizer which is compatible with the SSTL-2 logic levels is presented here. This electronic component can be classified into PLL Clock Driver. This clock-generating IC is a 48-bit device designed explicitly for microprocessors. According to the base part number CDCV850, its related parts can be found. A 48 pin is available on the clock PLL. There is a maximum supply voltage of 2.5V that electronic frequency generator can handle. Clock Drivers-type frequency generators are usually classified as this type. 10 signal outputs enable clock PLL to magnify output frequency as high as possible. At maximum 0.075 ns, this analog clock generator has low timing skew. By searching for parts that belong to the 850 family, you can find electronic parts that are similar. At a frequency of 140MHz, the system can achieve high efficiency. This clock generator operation can supply up to 6mA of current.
CDCV850DGG Features
Available in the 48-TFSOP (0.240, 6.10mm Width)
Supply voltage of 2.5V
Operating supply voltage of 2.5V
CDCV850DGG Applications
There are a lot of Texas Instruments CDCV850DGG Clock Generators applications.
- 1 Gigabit Ethernet
- Jitter reduction
- CB radios
- Broadcast communication
- Televisions
- Melting
- Aerospace and defense
- Time to digital converters
- Bit synchronization
- Coherent carrier tracking
