banner_page

CDCVF2505PW

3.3V PLL Clock Driver CDCVF2505 Clock Generators 8 Pins 8-TSSOP (0.173, 4.40mm Width) 8 Terminals Surface Mount 3V~3.6V Tube


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CDCVF2505PW
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 580
  • Description: 3.3V PLL Clock Driver CDCVF2505 Clock Generators 8 Pins 8-TSSOP (0.173, 4.40mm Width) 8 Terminals Surface Mount 3V~3.6V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Number of Pins 8
Weight 39.008944mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type PLL Clock Driver
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Frequency 200MHz
Base Part Number CDCVF2505
Pin Count 8
Number of Outputs 4
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Load Capacitance 25pF
Nominal Supply Current 5μA
Output Characteristics 3-STATE WITH SERIES RESISTOR
Input LVTTL
Ratio - Input:Output 1:5
PLL Yes with Bypass
Differential - Input:Output No/No
Height 1.2mm
Length 3mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CDCVF2505PW Overview


This clock IC is packaged using the Tube method. The 8-TSSOP (0.173, 4.40mm Width) package contains this clock generator. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 8 terminations can be found in frequency generators. A voltage of 3.3V should be applied to this electronic frequency generator. The input of this clock generator is designed to be LVTTL. To access the electronic component's full performance, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can easily be installed on a panel. The maximum voltage this clock PLL can handle is 3.6V. A maximum voltage of 3V should be used for this frequency generator for safety reasons. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. It has been classified as a PLL Clock Driver electronic part, which means that it is a semiconductor. This clock-generating IC is a 8-bit device designed explicitly for microprocessors. You can find related electrical components to the base part number CDCVF2505. It is possible to connect to the frequency generators via 8 pins. There is a maximum supply voltage of 3.3V that this analog clock generator can handle. 4 signal outputs allow for maximi4ation of output frequency. High efficiency is achieved when operating at a frequency of 200MHz. In terms of load capacitance, analog clock generator is capable of delivering 25pF.

CDCVF2505PW Features


Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 25pF

CDCVF2505PW Applications


There are a lot of Texas Instruments CDCVF2505PW Clock Generators applications.

  • Antenna automatic tracking
  • Media broadcast servers
  • VSAT (Small Ground Satellite Station)
  • GPS systems
  • Wi-Fi routers
  • Phase modulation cellular systems
  • Microwave backhaul IF
  • Automatic control
  • Signal modulation and demodulation
  • MRI

Write a review

Note: HTML is not translated!
    Bad           Good