CR5410S-300
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | DIN Rail, Panel |
| Mounting Type | DIN Rail, Panel |
| Package / Case | Module |
| Operating Temperature | 0°C~50°C |
| Packaging | Bulk |
| Published | 2014 |
| Series | CR5410S |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 50°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 24V |
| Frequency | DC~4kHz |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 35mA |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Max Supply Current | 35mA |
| Accuracy | ±1% |
| Sensor Type | Hall Effect, Closed Loop |
| For Measuring | AC/DC |
| Current - Sensing | 300A |
| RoHS Status | ROHS3 Compliant |
CR5410S-300 Overview
Safety precautions are taken by putting the current sensors in Module packages. A Bulk is used to protect the current sensors against damage. It is recommended that these current sensors supply a maximum current of 35mA. Current sensors should not provide more current than 35mA. In order for the current sensors to operate, the operating temperature must not be lower than 0°C. But the maximum operating temperature for current sensors should be set to 50°C.
CR5410S-300 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: 0°C~50°C
1 Channels
Mounting Type: DIN Rail, Panel
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: 24V
Frequency: DC~4kHz
Sensing Current: 300A
Module Package
CR5410S-300 Applications
There are a lot of CR Magnetics Inc. CR5410S-300 Current Sensors applications.
- Uninterruptible Power Supplies(UPS)
- Continuity
- Power Supplies for welding applications
- Power factor correction
- General purpose inverters
- Switched Mode Power Supplies(SMPS)
- Uninterruptable Power Supllies (UPS)
- Motor and load control
- Overcurrent protection
- Electrical drives
