CS5106LSWR24
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | ALSO REQUIRES AN ADDITIONAL INPUT VCC TO OPERATE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CS5106 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Voltage - Supply (Vcc/Vdd) | 9V~16V |
| Control Features | Current Limit, Enable, Frequency Control, Ramp |
| Input Voltage (Min) | 9V |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.5A |
| Frequency - Switching | 512kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | SINGLE |
| Max Frequency | 540kHz |
| Duty Cycle (Max) | 60% |
| Length | 8.2mm |
| Width | 5.29mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
CS5106LSWR24 Overview
As a result of 24-SSOP (0.209, 5.30mm Width) compact design, the switching controller is compatible with most applications. There is sufficient capacity to generate switching controller for outputs 1. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The system can process Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 9V~16V. Qualified to work in a -40°C~85°C TA dc switcher. Switching can be done at 512kHz with this switching controller. The Surface Mount makes it ideal for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Frequency Control, Ramp. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. DUAL are the position of the terminal of the switching converters. A variety of 24 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Search for "CS5106" to find other relevant dc to dc converter ics. Specially, switching converter corresponds to type Switching Regulator or Controllers. 9V should be the minimum input voltage for the dc dc voltage regulator. There is a maximum frequency of 540kHz for this dc regulators. Hence, ALSO REQUIRES AN ADDITIONAL INPUT VCC TO OPERATE is used to better suit the DC to DC voltage regulator's situation. Whenever the current value is 0.5A, switching converter outputs the highest possible value.
CS5106LSWR24 Features
Transistor Driver Outputs
Switching Frequency: 512kHz
Current Limit, Enable, Frequency Control, Ramp
PULSE WIDTH MODULATION
ALSO REQUIRES AN ADDITIONAL INPUT VCC TO OPERATE
CS5106LSWR24 Applications
There are a lot of ON Semiconductor CS5106LSWR24 DC to DC converter applications.
- Remotely powered electric motors
- Surge protection circuits
- Laboratories
- Electric heating, lighting
- Smoke prevention equipment
- Digital video recorders
- Flexible manufacturing cells
- Solar power plants
- Direct power supply system
- Packaging
