CSLA2GE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Number of Pins | 3 |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSLA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 6V~12V |
| Current Rating | 92A |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 20mA |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 6V |
| Polarization | Bidirectional |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Response Time | 3μs |
| Sensor Type | Hall Effect, Open Loop |
| Sensitivity | 26.1mV/N |
| Max Supply Voltage (DC) | 12V |
| Min Supply Voltage (DC) | 6V |
| For Measuring | AC/DC |
| Current - Sensing | 92A |
| Length | 30.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
CSLA2GE Overview
Current sensors are housed in Module, Single Pass Through packages to ensure their safety. A protective Bulk is placed over these current sensors in order to prevent damage to the devices. These current sensors should supply 20mA current at their maximum. A current sensor should not provide a current greater than 20mA. If these current sensors are to function, their operating temperatures cannot be lower than -25°C. For the current sensors, however, the maximum operating temperature should be set to 85°C. There is no current for which the current sensors have been designed. A current sensor like this has 3 pins. It is nominally assumed that current sensors provide 20mA current. This sensor must supply a voltage no less than 6V in a DC circuit. In the DC circuit, however, the voltage supplied by the current sensors should not exceed 12V.
CSLA2GE Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 6V~12V
Sensing Current: 92A
Module, Single Pass Through Package
CSLA2GE Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSLA2GE Current Sensors applications.
- Leakage Current Sensors
- Industrial Monitoring and Control Systems
- Uninterruptable Power Supllies (UPS)
- Power supplies for welding applications
- Battery chargers and systems
- Power factor correction
- Proving Switch
- Battery supplied applications
- AC variabel speed drives and servo motor drives
- Static converters for for DC motor drives
