Parameters |
Factory Lead Time |
1 Week |
Mount |
Panel |
Mounting Type |
Through Hole |
Package / Case |
Module, Single Pass Through |
Number of Pins |
3 |
Material |
Plastic |
Housing Material |
PBT |
Operating Temperature |
-40°C~85°C |
Packaging |
Bulk |
Published |
2002 |
Series |
CSN |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Voltage - Supply |
±12V~18V |
Reach Compliance Code |
unknown |
Current Rating |
300A |
Frequency |
150kHz |
Output |
Ratiometric, Current |
Current - Supply (Max) |
14mA |
Max Output Current |
600A |
Operating Supply Voltage |
15V |
Number of Channels |
1 |
Polarization |
Bidirectional |
Nominal Supply Current |
10mA |
Output Current |
150mA |
Max Supply Current |
14mA |
Accuracy |
±0.5% |
Response Time |
0.5μs |
Bandwidth |
150 kHz |
Wire/Cable Diameter |
26 mm |
Coil Resistance |
31Ohm |
Sensor Type |
Hall Effect, Closed Loop |
Max Supply Voltage (DC) |
18V |
Min Supply Voltage (DC) |
12V |
For Measuring |
AC/DC |
Width |
67.5mm |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
CSNS300M Overview
For safety reasons, the current sensors are enclosed in Module, Single Pass Through packages. In order to protect the devices from damage, these current sensors are packaged in the Bulk. It is recommended that these current sensors provide no more than 14mA amps of current. The current supplied by current sensors should not be higher than 14mA. Designed for 300A current, the current sensors are capable of measuring. It has 3 pins. In operation, the current sensors could produce 15V. Sensors are supposed to provide a current of 10mA by default. When current sensors are used, the current output should be 150mA. The voltage supplied by these sensors should not be lower than 12V in a DC circuit. In the DC circuit, the voltage provided by the current sensors should not exceed 18V.
CSNS300M Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -40°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: ±12V~18V
Frequency: 150kHz
Module, Single Pass Through Package
CSNS300M Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSNS300M Current Sensors applications.
- DC and AC power monitoring
- Battery supplied applications
- Overcurrent Detection
- OEM Current Sensing
- Static converters for for DC motor drives
- DC motor drives
- Frequency, Voltage, and Solar Inverters
- Static converters for DC motor drives
- Battery chargers and systems
- Mobile applications