Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2000 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Clock Generator, Fanout Distribution |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Clock Generators |
Voltage - Supply |
3.135V~3.465V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
3.3V |
Frequency |
200MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY22381 |
Output |
CMOS |
Pin Count |
8 |
Operating Supply Voltage |
3.3V |
Number of Elements |
3 |
Number of Circuits |
1 |
Operating Supply Current |
35mA |
Input |
LVTTL, Crystal |
Ratio - Input:Output |
1:3 |
Primary Clock/Crystal Frequency-Nom |
166MHz |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Max Duty Cycle |
55 % |
Divider/Multiplier |
Yes/No |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY22381FXC Overview
The Tube method is used for packaging clock ICs. This clock generator is embedded in the 8-SOIC (0.154, 3.90mm Width) package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. In it, there are 8 terminations to be found. Clock generator ics require a voltage of 3.3V. It is designed that the Clock PLL's input should be LVTTL, Crystal. For a full understanding of the electronic part's performance, 1 circuits are implemented. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock generator ic works with 3.135V~3.465V. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. I would like to present to you a frequency synthesizer that is compatible with CMOS logic levels. This electronic component can be classified into Clock Generator, Fanout Distribution. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. According to the base part number CY22381, its related parts can be found. There are 8 pins on the frequency generators that are available for use. The maximum supply voltage that analog clock generator can handle is 3.3V. Clock generator can also be included into Clock Generators. By operating at a frequency of 200MHz, frequency generator is able to achieve high efficiency. For its full function, a supply current of 35mA is required. In this case, we have a 3-element clock PLL that performs well in the absence of jitter.
CY22381FXC Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22381FXC Applications
There are a lot of Cypress Semiconductor Corp CY22381FXC Clock Generators applications.
- Small signal recovery
- Automatic control system test
- Wireless base station for LTE, LTE-advanced
- Quenching?
- PMR (Professional Mobile Radio)
- Coherent detection of the signal
- Automatic control
- VSAT (Small Ground Satellite Station)
- Media broadcast servers
- Signal generator