Parameters |
Weight |
172.98879mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2010 |
Series |
Automotive, AEC-Q100 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Clock Generator, Fanout Distribution |
Voltage - Supply |
3.135V~3.465V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Output |
CMOS |
Number of Outputs |
6 |
Operating Supply Voltage |
3.3V |
Number of Circuits |
1 |
Operating Supply Current |
100mA |
Frequency (Max) |
166MHz |
Input |
LVTTL, Crystal |
Ratio - Input:Output |
1:6 |
Primary Clock/Crystal Frequency-Nom |
150MHz |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Max Duty Cycle |
60 % |
Divider/Multiplier |
Yes/No |
Length |
5mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
CY22393FXA Overview
In order to package it as a clock IC, the Tube package is used. As part of the 16-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. A maximum temperature of NOT SPECIFIED can be sustained by this clock generator ic during reflowing. There are 16 terminations found in the file. Clock generator ics require a voltage of 3.3V. As the Clock PLL's input, LVTTL, Crystal is designed to be used in order to generate the clock signal. 1 circuits are implemented to access the electronic component's full performance. Providing a maximum frequency of 166MHz, this clock-based RF synthesizer is suitable for a variety of applications. Surface Mount-slots make it easy to mount this electronic component on panels. This clock PLL works with a supply voltage of 3.135V~3.465V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. CMOS logic levels are supported by this RF synthesizer. This electronic component can be classified into Clock Generator, Fanout Distribution. There are 16 pins on the frequency generators that are available for use. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. This electronic part is a member of the Automotive, AEC-Q100 series. The frequency synthesizer features 6 signal outputs to ensure as high a frequency as possible. For the RF synthesizer to function properly, a supply current of 100mA must be provided.
CY22393FXA Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22393FXA Applications
There are a lot of Cypress Semiconductor Corp CY22393FXA Clock Generators applications.
- Infotainment systems
- HDD recorders
- Small signal recovery
- Vector network analyzers (VNA)
- Radar
- Laptops
- CB radios
- Frequency Modulation (FM) stereo decoders
- Melting
- Mobile telephones