banner_page

CY22801KFXIT

3.3V Fanout Distribution, Multiplexer, Spread Spectrum Clock Generator 166.6MHz CY22801 Clock Generators 8 Pins 8-SOIC (0.154, 3.90mm Width) 8 Terminals Surface Mount 3.14V~3.47V Tape & Reel (TR)


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-CY22801KFXIT
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 899
  • Description: 3.3V Fanout Distribution, Multiplexer, Spread Spectrum Clock Generator 166.6MHz CY22801 Clock Generators 8 Pins 8-SOIC (0.154, 3.90mm Width) 8 Terminals Surface Mount 3.14V~3.47V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Gold, Tin
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2010
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code EAR99
Type Fanout Distribution, Multiplexer, Spread Spectrum Clock Generator
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Clock Generators
Voltage - Supply 3.14V~3.47V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number CY22801
Output LVCMOS
Pin Count 8
Number of Outputs 3
Qualification Status Not Qualified
Operating Supply Voltage 3.3V
Number of Circuits 1
Frequency (Max) 166.6MHz
Input Clock, Crystal
Ratio - Input:Output 1:3
Primary Clock/Crystal Frequency-Nom 30MHz
PLL Yes
Differential - Input:Output No/No
Divider/Multiplier Yes/No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CY22801KFXIT Overview


Clock ICs are packaged using the Tape & Reel (TR) method. In the 8-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. There are 8 terminations found in this file. Clock generator ics require a voltage of 3.3V. In this clock generator, Clock, Crystal is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. This clock-based frequency generator provides a frequency up to 166.6MHz Max. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. There should be 3.14V~3.47V provided with this RF synthesizer. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. LVCMOS logic levels are supported by this RF synthesizer. As far as this electronic part is concerned, it can be classified as a Fanout Distribution, Multiplexer, Spread Spectrum Clock Generator component. There is a 8-bit clock-generating IC built specifically for microprocessors in this frequency generator. These related electrical parts are available for the base part number CY22801. PF synthesizers is equipped with 8 pins. There is a maximum supply voltage of 3.3V that this analog clock generator can handle. And basically, this clock generator is often classified as a kind of Clock Generators. Clock PLL is facilitated with 3 signal outputs to magnify output frequency as high as possible.

CY22801KFXIT Features


Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY22801KFXIT Applications


There are a lot of Cypress Semiconductor Corp CY22801KFXIT Clock Generators applications.

  • Signal analyzer
  • 1 Gigabit Ethernet
  • Sampling clocks for ADC and DAC
  • High-frequency induction heating
  • Bluetooth receivers
  • Electronic equipment
  • Wide area power system
  • Clock synchronization
  • VSAT (Small Ground Satellite Station)
  • Pulsed digital systems

Write a review

Note: HTML is not translated!
    Bad           Good