CY2303SXCT
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Clock Multiplier, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2303 |
| Output | LVCMOS |
| Pin Count | 8 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 166.67MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:3 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 0.2 ns |
| Divider/Multiplier | No/Yes |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
CY2303SXCT Overview
Tape & Reel (TR)-method packaging is used for clock ICs. Embedded in the 8-SOIC (0.154, 3.90mm Width) package is this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. There are a total of 8 terminations in this file. This time clock generator should be voltaged at 3.3V. LVCMOS, LVTTL is designed for clock generator's input. To access the electronic component's full performance, 1 circuits are implemented. 166.67MHz is the maximal value for normal operation. This component can be conveniently installed on the panel thanks to the Surface Mount. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. There should be 3V~3.6V provided with this RF synthesizer. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. A frequency synthesizer which is compatible with the LVCMOS logic levels is presented here. This is an electronic part that can be classified as a Clock Multiplier, Fanout Distribution in this case. This clock-generating IC is a 8-bit device designed explicitly for microprocessors. You can find related electrical components to the base part number CY2303. PF synthesizers is equipped with 8 pins. PLL clock can handle a voltage of 3.3V as its supply voltage. Clock generator can also be included into Clock Drivers. The output frequency can be amplified as high as possible with its 3 signal outputs. At maximum 0.2 ns, this analog clock generator has low timing skew.
CY2303SXCT Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2303SXCT Applications
There are a lot of Cypress Semiconductor Corp CY2303SXCT Clock Generators applications.
- Microwave backhaul IF
- Mixed mode (analog and digital) applications
- Ports
- FMCW Radar
- DVD recorders
- Clock generation systems
- Wireless infrastructure
- Wireless handsets
- Coherent carrier tracking
- Coherent detection of the signal
