CY2304SXC-1T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2304 |
| Pin Count | 8 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 133.3MHz |
| Output Characteristics | 3-STATE |
| Input | Clock |
| Ratio - Input:Output | 1:4 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.5 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2304SXC-1T Overview
This clock IC is packaged using the Tape & Reel (TR) method. 8-SOIC (0.154, 3.90mm Width) contains this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As a result, frequency synthesizers can be found to contain 8 terminations. To operate this time clock generator, 3.3V voltage should be applied. In this clock generator, Clock is used as the input to the clock. There are 1 circuits implemented in order to achieve full performance from this electronic part. An upper frequency limit of 133.3MHz Max can be achieved with this clock-based frequency synthesizer. This component can be conveniently installed on the panel thanks to the Surface Mount. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. There should be a voltage supply above 3V for this frequency generator in order to ensure its safety. Clock generator ic works with 3V~3.6V. Using the test statistics, it is estimated that the ambient temperature should be set to 0°C~70°C. As far as this electronic part is concerned, it can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. It is a 8-bit IC that is designed for microprocessors specifically. CY2304 is the base part number for finding related electronic parts. There are a number of 8 pins that are available on the clock generators. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. Clock PLL has 4 signal outputs to maximi4e output frequency. This clock generator offers low timing skew at 0.5 ns Max.
CY2304SXC-1T Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2304SXC-1T Applications
There are a lot of Cypress Semiconductor Corp CY2304SXC-1T Clock Generators applications.
- Wireless base station for LTE, LTE-advanced
- Digital circuits
- Microprocessor clock multipliers
- MRI
- Electronic countermeasures
- VSAT (Small Ground Satellite Station)
- Signal generator
- Signal modulation and demodulation
- Frequency synthesis
- Frequency synthesis
