CY2304SXI-2
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2304 |
| Pin Count | 8 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Output Characteristics | 3-STATE |
| Input | Clock |
| Ratio - Input:Output | 1:4 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/Yes |
| Same Edge Skew-Max (tskwd) | 0.5 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
CY2304SXI-2 Overview
Tube-method packaging is used for clock ICs. The 8-SOIC (0.154, 3.90mm Width) package includes this clock generator. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. 8 terminations can be found in frequency generators. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. In this case, Clock is designed to be the input of the clock generator. A total of 1 circuits are implemented to access the full performance of the electrical part. This component can be conveniently installed on the panel thanks to the Surface Mount. The maximal supply voltage (Vsup) reaches 3.6V. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. In terms of supply voltage, RF synthesizer works with 3V~3.6V. The temperature should be set at -40°C~85°C to ensure reliable performance. A Fanout Buffer (Distribution), Zero Delay Buffer is a classification for the electronic part in question. There is a 8-bit clock-generating IC built specifically for microprocessors in this frequency generator. This part number CY2304 is related to the following electrical components. There are 8 pins on the frequency generator that are available for use. PLL clock can handle a voltage of 3.3V as its supply voltage. The output frequency can be magnified as high as possible with the assistance of 4 signal outputs. Low timing skew is offered by this RF synthesizer at maximum 0.5 ns. Frequency generator is able to reali133.3MHze high efficiency when operating at a frequency of 133.3MHz.
CY2304SXI-2 Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2304SXI-2 Applications
There are a lot of Cypress Semiconductor Corp CY2304SXI-2 Clock Generators applications.
- Phase modulation cellular systems
- Picocells, femtocells and small cells
- Automatic control
- DVD add-on cards for multimedia PCs
- DVD recorders
- Satellite navigation communication
- Automatic test equipment
- Microwave radio
- Aerospace and defense
- Walkie-talkies
