banner_page

CY2304SXI-2T

3.3V Fanout Buffer (Distribution), Zero Delay Buffer 133.3MHz CY2304 Clock Generators 8 Pins 8-SOIC (0.154, 3.90mm Width) 8 Terminals Surface Mount 3V~3.6V Tape & Reel (TR)


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-CY2304SXI-2T
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 998
  • Description: 3.3V Fanout Buffer (Distribution), Zero Delay Buffer 133.3MHz CY2304 Clock Generators 8 Pins 8-SOIC (0.154, 3.90mm Width) 8 Terminals Surface Mount 3V~3.6V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Gold, Tin
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2011
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code EAR99
Type Fanout Buffer (Distribution), Zero Delay Buffer
Terminal Finish Matte Tin (Sn)
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number CY2304
Pin Count 8
Number of Outputs 4
Qualification Status Not Qualified
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Nominal Supply Current 45mA
Frequency (Max) 133.3MHz
Output Characteristics 3-STATE
Input Clock
Ratio - Input:Output 1:4
PLL Yes
Differential - Input:Output No/No
Divider/Multiplier Yes/Yes
Same Edge Skew-Max (tskwd) 0.5 ns
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CY2304SXI-2T Overview


As a clock IC, it is packaged by the Tape & Reel (TR) method. In the 8-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. In it, there are 8 terminations to be found. The supply voltage of 3.3V allows for high efficiency. A clock generator's input is called Clock and it is designed as the input for this clock generator. For a full understanding of the electronic part's performance, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 133.3MHz maximum. The Surface Mount allows the electrical component to be installed conveniently on the panel. The maximum voltage this clock PLL can handle is 3.6V. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. Fanout Buffer (Distribution), Zero Delay Buffer is the type of electrical part that this component is classified as. In particular, this clock PLL is designed to be used with microprocessors. This part number CY2304 is related to the following electrical components. There are 8 pins that are available on the clock PLL. In terms of the supply voltage, PLL clock can handle 3.3V volts. The output frequency can be magnified as high as possible with the assistance of 4 signal outputs. As a result of this digital clock generator, there is a low timing skew at 0.5 ns max.

CY2304SXI-2T Features


Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY2304SXI-2T Applications


There are a lot of Cypress Semiconductor Corp CY2304SXI-2T Clock Generators applications.

  • Instrument
  • Peripheral devices
  • Cell phones
  • VSAT (Small Ground Satellite Station)
  • Cable television converter boxes
  • Modems
  • Various decoding circuits
  • Wireless handsets
  • 10 Gigabit Ethernet
  • Automatic control

Write a review

Note: HTML is not translated!
    Bad           Good