CY2305CSXA-1HT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2305 |
| Output | LVCMOS |
| Pin Count | 8 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 35mA |
| Frequency (Max) | 133.33MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:5 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2305CSXA-1HT Overview
The Tape & Reel (TR) method is used for packaging clock ICs. In the 8-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. It contains a total of 8 terminations within RF synthesizer. For this clock generator ic, a voltage of 3.3V is required. LVCMOS, LVTTL is designed as this clock generator's input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An up to 133.33MHz frequency is provided by this clock-based RF synthesizer. This component can be conveniently installed on the panel thanks to the Surface Mount. The maximal supply voltage this clock generator would take is 3.6V. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. There should be 3V~3.6V provided with this RF synthesizer. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. A frequency synthesizer which is compatible with the LVCMOS logic levels is presented here. It has been classified as a Fanout Buffer (Distribution), Zero Delay Buffer electronic part, which means that it is a semiconductor. The clock-generating IC is a 8-bit device designed specifically for microprocessors. Related electrical parts can be found for the base part number CY2305. There are 8 pins on the frequency generators that are available for use. Time clock generator can handle a voltage of 3.3V as the supply voltage. This clock generator can be classified as a kind of Clock Drivers in general. Clock PLL is facilitated with 5 signal outputs to magnify output frequency as high as possible. At 0.2 ns Max, this clock generator offers low timing skew.
CY2305CSXA-1HT Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2305CSXA-1HT Applications
There are a lot of Cypress Semiconductor Corp CY2305CSXA-1HT Clock Generators applications.
- CB radios
- Myriad digital applications
- Local oscillators (LOs)
- Bit synchronization
- PMR (Professional Mobile Radio)
- Picocells, femtocells and small cells
- Satellite navigation communication
- Laptops
- Pagers
- Time to digital converters
