CY2305SXC-1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2305 |
| Pin Count | 8 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 32mA |
| Max Supply Current | 32mA |
| Output Characteristics | 3-STATE |
| Input | Clock |
| Ratio - Input:Output | 1:5 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Height | 1.48mm |
| Length | 4.98mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2305SXC-1 Overview
It is packaged using the Tube method since it is a clock IC. The 8-SOIC (0.154, 3.90mm Width) package embeds this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. There are a total of 8 terminations in this file. For this clock generator ic, a voltage of 3.3V is required. Clock is designed for clock generator's input. For full access to the electronic component's capabilities, 1 circuits are implemented. Surface Mount-slots make it easy to mount this electronic component on panels. It would be possible to supply this clock PLL with 3.6V of power. A maximum voltage of 3V should be used for this frequency generator for safety reasons. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. As far as electrical parts go, this component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. The clock-generating IC is a 8-bit device designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number CY2305. There is an available 8 pin on the PLL. This time clock generator can handle a voltage of 3.3V as its supply voltage. The output frequency can be amplified as high as possible with its 5 signal outputs. Using a frequency of 133.33MHz allows frequency synthesizer to achieve high efficiencies. The maximal current supplied for phase locked loop's operation reaches 32mA.
CY2305SXC-1 Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2305SXC-1 Applications
There are a lot of Cypress Semiconductor Corp CY2305SXC-1 Clock Generators applications.
- PCI express cards
- Wireless base station for LTE, LTE-advanced
- Media broadcast servers
- Cellular/4G
- Deep space exploration
- Smartphones
- Tracking filters
- Telecommunication systems
- Jitter reduction
- Skew suppression
