CY2305SXI-1HT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2305 |
| Pin Count | 8 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 35mA |
| Output Characteristics | 3-STATE |
| Input | Clock |
| Ratio - Input:Output | 1:5 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2305SXI-1HT Overview
In order to package it as a clock IC, the Tape & Reel (TR) package is used. There is a clock generator embedded in the 8-SOIC (0.154, 3.90mm Width) package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. As you can see, it consists of 8 terminations. This electronic frequency generator requires a voltage of 3.3V. A clock generator's input is called Clock and it is designed as the input for this clock generator. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. The maximal supply voltage this clock generator would take is 3.6V. It is safe to use this frequency synthesizer with a supply voltage above 3V. Clock generators should operate with the voltage supply of 3V~3.6V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. Fanout Buffer (Distribution), Zero Delay Buffer is the type of electrical part that this component is classified as. In this IC, a 8-bit frequency generator is designed specifically for use in microprocessors. The related electrical components for the base part number CY2305 can be found below. A 8 pin is available on the clock PLL. The maximum supply voltage that analog clock generator can handle is 3.3V. The output frequency can be magnified as high as possible with the assistance of 5 signal outputs. By operating at a frequency of 133.33MHz, frequency generator is able to achieve high efficiency.
CY2305SXI-1HT Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2305SXI-1HT Applications
There are a lot of Cypress Semiconductor Corp CY2305SXI-1HT Clock Generators applications.
- Bit synchronization
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Notebooks
- Automatic test equipment
- High-speed optical transport network (OTN)
- Infotainment systems
- Pulsed digital systems
- Wi-Fi routers
- FSK demodulators
- Small signal recovery
