CY2308SXI-2T
| Parameters | |
|---|---|
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 133.3MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/Yes |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
CY2308SXI-2T Overview
A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. A Clock PLL is included with the 16-SOIC (0.154, 3.90mm Width) package. When reflowed, this frequency generator can withstand a maximum temperature of 260. There are a total of 16 terminations in this file. For this clock generator ic, a voltage of 3.3V is required. The input of this clock generator is designed to be LVCMOS, LVTTL. To access the electronic component's full performance, 1 circuits are implemented. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 133.3MHz. The Surface Mount allows the electrical component to be installed conveniently on the panel. It would be possible to supply this clock PLL with 3.6V of power. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. There should be 3V~3.6V provided with this RF synthesizer. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. The RF synthesizer is compatible with LVCMOS logic levels. An electrical part such as this one can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. Microprocessor-specific clock PLL with 16 bits. The related electronic parts of part number CY2308 are listed below. It is possible to connect to the PLL via 16 pins. Electronic frequency generator can handle voltages up to 3.3V. As a result, it is commonly classified as a type of Clock Drivers clock PLL. Clock PLL has 8 signal outputs to maximi8e output frequency. The timing skew of this frequency synthesizer is low at 0.2 nsmax.
CY2308SXI-2T Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308SXI-2T Applications
There are a lot of Cypress Semiconductor Corp CY2308SXI-2T Clock Generators applications.
- Bluetooth receivers
- Ports
- Picocells, femtocells and small cells
- Wi-Fi routers
- FMCW Radar
- Closed circuit systems
- Cell phones
- Navigation, positioning and surveillance system for aircraft, ships and ships
- High-speed optical transport network (OTN)
- Laptops
