CY2308SXI-4T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 133.3MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| Max I(ol) | 0.008 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | No/Yes |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Length | 9.893mm |
| Width | 3.8985mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2308SXI-4T Overview
The Tape & Reel (TR) method is used for packaging clock ICs. The 16-SOIC (0.154, 3.90mm Width) package embeds this Clock PLL. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. There are 16 terminations found in the file. To operate this time clock generator, 3.3V voltage should be applied. This Clock PLL will be fed by LVCMOS, LVTTL as its input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 133.3MHz. Surface Mount-slots make it easy to mount this electronic component on panels. There is a maximum voltage of 3.6V for this clock generator. It is safe to use this frequency synthesizer with a supply voltage above 3V. There should be 3V~3.6V provided with this RF synthesizer. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. LVCMOS is designed for clock generator's output. This is an electronic part that can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer in this case. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. This part number is related to its related electronic parts. PLL is designed with 16 pins. Supply voltage 3.3V is what time clock generator can handle. As a result, it is commonly classified as a type of Clock Drivers clock PLL. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns.
CY2308SXI-4T Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308SXI-4T Applications
There are a lot of Cypress Semiconductor Corp CY2308SXI-4T Clock Generators applications.
- Coherent detection of the signal
- Vector network analyzers (VNA)
- Automatic control
- Satellite receivers
- Signal generator
- Tracking filters
- Digital HDTV systems
- Frequency shifting decodes
- Sampling clocks for ADC and DAC
- Wireless base station for LTE, LTE-advanced
