CY2309CSXC-1T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2309 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 32mA |
| Frequency (Max) | 133.33MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| Max I(ol) | 0.008 A |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 8.7 ns |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2309CSXC-1T Overview
It is packaged using the Tape & Reel (TR) method since it is a clock IC. As part of the 16-SOIC (0.154, 3.90mm Width) package, this clock generator is embedded. This clock generator will sustain a maximum temperature of 260 when reflown. As a result, frequency synthesizers can be found to contain 16 terminations. This clock generator ic should receive a voltage of 3.3V. A clock generator's input is called LVCMOS, LVTTL and it is designed as the input for this clock generator. 1 circuits are used to achieve clock PLL's superior flexibility. It provides a maximum frequency of 133.33MHz. Because of the Surface Mount, clock PLL can be easily mounted on the panel. There is a maximum voltage of 3.6V for this clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Based on test statistics, ambient temperature should be set at 0°C~70°C. This is a clock generator compatible with LVCMOS logic levels. This electronic component can be classified into Fanout Buffer (Distribution), Zero Delay Buffer. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. This part number CY2309 is related to the following electrical components. There are a number of 16 pins that are available on the frequency synthesizers. RF synthesizers can handle voltages up to 3.3V. Fundamentally, this is a kind of Clock Drivers clock PLL. Clock PLL is facilitated with 9 signal outputs to magnify output frequency as high as possible. At maximum 0.2 ns, this analog clock generator has low timing skew.
CY2309CSXC-1T Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309CSXC-1T Applications
There are a lot of Cypress Semiconductor Corp CY2309CSXC-1T Clock Generators applications.
- Main oscillator in receiver
- Infotainment systems
- Threshold extension
- Digital circuits
- Walkie-talkies
- Myriad digital applications
- Automatic control
- Symbol synchronization
- Carrier synchronization in wired communication
- Melting
